Lanier AP2145, Руководство по установке

Страница: 411 / 424

1
1394 Interface Unit Type 4510
(Code: G065)
For Machine Code: G065
INSTALLATION GUIDE
Preparation
For a safe operation, read " Safety
Information " in the Setup Guide.
R
CAUTION:
Important
❒
Check the printer nameplate to
confirm the model code.
❒
In Windows 2000, the 1394 Inter-
face Unit can only be used with
Service Pack 1 or later. If the Serv-
ice Pack is not installed, the con-
nectable number of devices in a
1394 bus is only one, and the client
cannot access the 1394 Interface
Unit without using an account that
has the administrators permission.
❒
The 1394 Interface Unit can be
damaged by a small amount of
static electricity. You should touch
some metal to discharge static elec-
tricity.
❒
Use the 1394 interface cable that
comes with this printer.
❒
Do not plug or unplug the 1394 in-
terface cable while installing the
printer driver.
❒
Do not turn the device on or off,
while installing the printer driver.
❒
When the 1394 Interface Unit is in-
stalled, uninstall the printer driver
after the 1394 interface cable is un-
plugged.
Installing the 1394 Interface
Unit
A
Check the contents of the box for
the following items:
• 1394 Interface Unit
• 1394 interface cable (6-pin x 4-
pin)
• 1394 interface cable (6-pin x 6-
pin)
• Installation Guide
Note
❒
Other provided parts are not to
be used.
B
Turn off the printer.
C
Pull out the first paper tray (Tray
1) and take the screwdriver (
A A A A
)
from the tray. Each screw to be re-
moved requires this screwdriver.
• Do not touch the inside of the
printer board compartment. It
may cause a machine malfunc-
tion or a burn.
G065-8537