Lanier AP2145 Скачать руководство пользователя страница 243

Страница: 243 / 424

Configuring Protocols

Configuring a Windows 95/98/Me computer

These steps are for configuring a Windows 95/98/Me computer to use the
TCP/IP protocol.

AAAA

Open

[

Control Panel

]

and then double-click the

[

Network

]

icon. Make sure that

“TCP/IP” is listed in the

[

The following network components are installed:

]

box on

the

[

Configuration

]

tab.

Note

❒

If the TCP/IP protocol is not installed, click

[

Add

]

on the

[

Configuration

]

tab

to install it. For more information about installing the TCP/IP protocol, see
Windows 95/98/Me Help.

BBBB

Configure the TCP/IP protocol with the appropriate IP address, subnet
mask and other settings.

Check with the network administrator that the settings are correct.

Configuring NetBEUI for Printing

These instructions are for configuring the Network Interface Board and Win-
dows 95/98/Me to use the NetBEUI protocol.

Configuring the machine

Configure the machine to use the NetBEUI protocol.
• Make sure that the NetBEUI protocol is set to active. (The default is active.)

Reference

For more information about how to make the above settings, see the Setup
Guide.

Configuring a Windows 95/98/Me computer

Install the NetBEUI protocol on the Windows 95/98/Me computer and set it as
the default protocol.

AAAA

Open

[

Control Panel

]

, and then double-click the

[

Network

]

icon. Make sure

that “NetBEUI” is listed in the

[

The following network components are installed:

]

box on the

[

Configuration

]

tab.

Note

❒

If the NetBEUI protocol is not installed, click

[

Add

]

on the

[

Configuration

]

tab

to install it. For more information about installing the NetBEUI protocol,
see Windows 95/98/Me Help.

❒

If “NetBEUI

→

Dial-Up Adaptor” is listed in the

[

The following network com-

ponents are installed:

]

box, select it and click

[

Remove

]

to remove the binding.

Содержание AP2145





































































































































































































































































































































































































































Результаты поиска

Содержание AP2145

Отзывы:

Бренды по названию

Популярные бренды

Lanier AP2145, Руководство по установке

Результаты поиска

Содержание AP2145

Отзывы:

Бренды по названию

Популярные бренды