Lang R60S, Установка, эксплуатация, обслуживание и устранение неисправностей, Страница: 7 / 24

Unpacking
7
Receiving the Oven
Upon receipt, check for freight damage, both visible and concealed. Visible
damage should be noted on the freight bill at the time of delivery and
signed by the carrier's agent. Concealed loss or damage means loss or
damage, which does not become apparent until the merchandise has been
unpacked. If concealed loss or damage is discovered upon unpacking,
make a written request for inspection by the carrier's agent within 15 days
of delivery. All packing material should be kept for inspection. Do not
return damaged merchandise to Lang Manufacturing Company. File your
claim with the carrier.
Location
Prior to un-crating, move the range as near its intended location as
practical. The crating will help protect the unit from the physical damage
normally associated with moving it through hallways and doorways.
Un-crating
The range will arrive completely assembled inside a wood frame covered by
cardboard box and strapped to a skid. Remove the cardboard cover, cut
the straps and remove the wood frame.
RANGE WEIGHS 900 LBS (408 kilograms). FOR SAFE
HANDLING, INSTALLER SHOULD OBTAIN HELP AS
NEEDED, OR EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A FORKLIFT,
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT
FROM THE SKID AND MOVE IT TO THE PLACE OF
INSTALLATION.
CAUTION
ANY STAND, COUNTER OR OTHER DEVICE ON WHICH
RANGE WILL BE LOCATED MUST BE DESIGNED TO
SUPPORT THE WEIGHT OF THE OVEN (900 LBS.).
SHIPPING STRAPS ARE UNDER TENSION AND CAN
SNAP BACK WHEN CUT.
Remove range from skid and place in intended location.
Installing the Legs
Legs or casters are available and must be specified upon ordering.
To install the 6-inch legs, remove the legs from the oven cavity, place some
cardboard on the floor and gently tip the range onto its back. Fasten the
legs into the threaded holes provided and then gently flip the oven onto its
legs.
To install the 6-inch casters, remove the casters from the oven cavity, place
some cardboard on the floor and gently tip the range onto its back. Attach
the casters to the adapter plates. Gently tip the oven onto its casters.