2M-W741 G
as F
ull S
iz
e C
omput
er
iz
ed C
on
vec
tion O
ven GCSF
1
Enviro-STAR Typical Operation Sequence:
ACTION
RESULT
Press the POWER button
Front panel lights up.
Select Fan Speed HI or Fan Speed LO.
Selected Fan Speed light will be lit.
Adjust to desired temperature between 125° F
Fan and heat come on. Fan will reverse direction every 2
and 525°F.
(Minimum suggested temperature
minutes (approximately) through out cooking process.
for operation with Steam is 250°F.)
.
Set Pulse Steam by pressing and holding Pulse
Pulse Steam light will stay on. Digital display will momentarily
Steam button and selecting between 1 and
show selected interval between steam pulses.
120 minutes interval between pulses
Temperature reaches Set Point.
Set point reached within 12 minutes and audible tone signals.
Load Product into Oven.
See Hints & Suggestions – “Loading the Oven.”
Set Timer Knob to desired cook time.
Time starts timing down on digital display. If Pulse
Steam has been enabled, a 1 second shot of steam will be
applied at the selected interval.
Set Cook n Hold (Optional)
Cook n Hold light comes on to indicate feature is enabled.
Cooking timer times out.
Audible tone signals cook time complete.
If Cook n Hold feature is enabled, the oven temperature will
drop no lower than 150°F with the 150° time light on solid until
the timer is reset. The Cook n Hold light will go out at end of
timer.
Unload Oven
See Hints & Suggestions – “Unloading the Oven”
Enviro-ZONE Typical Operation Sequence:
ACTION
RESULT
Press the
“POWER”
button
Control Panel comes on, display says “LANG, Run Oven,
Time/Date/Program.
Select
“RUN OVEN”
.
Display will show a list of product to choose.
Select Product button next to Icon desired.
Display says “Preheating to xxx°F”.
Beeper sounds briefly.
Display says “Ready”.
Select Function to start.
Display shows possible product selection for that temperature.
Select Function to start.
Display says “Select Shelf”, Place Product in oven
on selected shelf.
Press Function Button next to desired shelf
Display will show icon chosen and begin to count down.
Beeper sounds continuously.
Display shows “DONE” press button and remove product
from that shelf.
Oven is ready for another program.
OPERATION
Содержание GCSF-ES
Страница 35: ......
