Lang GCSF-ES, Инструкция по установке и эксплуатации, Страница: 3 / 36

2M-W741 G
as F
ull S
iz
e C
omput
er
iz
ed C
on
vec
tion O
ven GCSF
SPECIFICATIONS
Model Height x Width x Depth Clearance from Weight
combustible surface Installed Shipping Freight Class
GCSF_1 36” x 40” x 40” Side:0, Back: , Floor: 4 555 lbs. 620lbs 70
(9.4cm x 0.6cm x 0.6cm) (252 kg) (28 kg)
GCSF_2 74” x 40.4” x 40” Side:0, Back: , Floor: 4 0 lbs. 240 lbs 70
(88cm x 02.6cm x 0.6cm) (503 kg) (562 kg)
WATER QUALITY REQUIREMENTS
Waterline pressure and quality MUST meet Lang Manufacturing Specifications listed below.
Contact your local water equipment system provider to assist you in determining your
specific water quality, or contact Lang Technical support for assistance, 1-800-807-9054.
-IMPORTANT-
YOUR LOCAL WATER CONDITIONS MAY DAMAGE YOUR LANG EQUIPMENT.
FAILURE TO PROPERLY TREAT WATER MAY RESULT IN DAMAGE AND MAY VOID
SOME OR ALL OF THE WARRANTY.
WATER SPECIFICATIONS,
after treatment the water must continuously be within the
following parameters.
Cold Water: 20 to 80 PSI, 3 GPH minimum capacity
pH: 6.8 to 7.6
Conductivity: <1/500,000 ohms per inch
Total dissolved solids: < 100 PPM
Hardness: 2 to 4 grains per gallon
Maximum Salinity Ion Content
Chlorine: < 0.5 PPM
Chlorides: < 30 PPM
Sulfates: < 40 PPM
Iron: < 0.1 PPM
Copper: < 0.05 PPM
Manganese: < 0.05 PPM
Chloramines: < 0.5 PPM
•
•
•
•
•
•
•
UTILITY REQUIREMENTS
Model Voltage Total kW Phase Amps/Line Total Gas Req. Gas W.C. Max.
GCSF_1
120V/60Hz 0.7 1 5.8` 3/8” NPT, 60,000 BTU/hr 12 W.C.
GCSF_2
120V/60Hz 1.4 3 11.6 3/8” NPT, 120,000 BTU/hr 12 W.C.
PROBLEMS, QUESTIONS or CONCERNS
Before you proceed consult you authorized Lang service agent directory
or
Call the Lang Technical Service at 1-800-48-564.