Page 26 of 43
Operating Manual
www.qedenv.com
SEM5000.002
© QED Environmental Systems Inc.
SEM5000 Surface Emissions Monitor
The battery is Lithium ion technology. This battery pack is not restricted according the
European and international regulations of dangerous goods. Therefore, the device can be
transported by plane following the requirements of the labelling of the package.
The charge level of the battery is shown with a battery icon in the upper, right-hand corner of
the screen. It displays three levels of charge. The last level corresponds to the last 30 minutes
of operation at 20°C.
NOTE: The SEM5000 battery charger can also be used to connect the instrument directly to
your PC for data download if Bluetooth is not available on your computer.
Leave the battery connected to the SEM5000
Plug the 9-pin connector into the battery’s battery charger/download connector
Plug the provided USB cable into the “USB 2” port on the battery charger and connect the
other end to your PC
Do Not Charge batteries in temperatures below zero degrees C.
Do not charge batteries in hazardous areas
Do not charge battery when connected to SEM5000
