Landoll EHP, Руководство оператора

Страница: 39 / 54

MAINTENANCE AND LUBRICATION
4-15
TABLE OF CONTENTS
Enclosure Interior &
Exterior (continued)
Inspect the interior and exterior of the
cabinet surfaces for bends, burrs, cracks in
metal or welds, dents, wear, distortion, and
visual defects.
Batteries Inspect batteries for bends, breaks, burrs,
bulging, cracks, dents, distortion, leaks,
punctures, swelling, wear, signs of arcing /
brittle / fatigue / heat, post condition and
visual defects.
Buss Bars Inspect insulation for bulging, cuts,
deterioration, dry rot, dents, wear, signs of
brittle / fatigue / heat and visual defects.
Inspect for cracks, distortion, warping,
signs of arcing / brittle / fatigue / heat or
defects that might cause poor conductivity.
Retainer Inspect retainer for bends, breaks, burrs,
cracks, dents, wear, signs of arcing / brittle
/ fatigue / heat and visual defects.
Inspect mounting hardware for bends,
breaks, burrs, cracks, dents, wear, signs of
arcing / brittle / fatigue / heat, tread
condition and visual defects.
Retainer & Hardware Inspect for corrosion, dirt, grease, and rust.
Harness & Cables Inspect insulation for bends, breaks,
bulging, cuts, deterioration, dry rot, dents,
kinks, wear, and visual defects.
Connectors & Terminals Inspect for bends, breaks, bulging, cuts,
deterioration, kinks, wear, signs of arcing,
brittle, fatigue, heat and visual defects.
Inspect for corrosion, dirt and grease build
up.
Electrical Components Inspect housings for bends, breaks, burrs,
cracks, dents, wear, signs of arcing / brittle
/ fatigue / heat, clogged cooling fins and
visual defects.
Inspect mounting / terminal hardware for
bends, breaks, burrs, cracks, dents, wear,
signs of arcing / brittle / fatigue / heat, tread
condition and visual defects.
Inspect components and mounting
hardware for corrosion, dirt and grease
build up.
Hydraulic System
Hoses
Inspect for bends, breaks, bulging, cuts,
deterioration, dry rot, flat spots, kinks, wear,
wet spots, thread condition, signs of brittle /
fatigue and visual defects.
Couplers & Fittings Inspect couplers and fittings for cracks,
dents, leaks, thread damage, wear, and
visual defects.
Reservoir Inspect the exterior surfaces for bends,
burrs, cracks in metal / welds, dents,
distortion, leaks, punctures, wear and
visual defects.
(continued next page)
Inspect reservoir for corrosion, dirt, rust,
grease.
Inspect Description Comment or (Good, Monitor, Faulty)