Landoll Brillion WCC Скачать руководство пользователя страница 68

Страница: 68 / 84

3-2

9J577-0822

TABLE OF CONTENTS

Attaching to the Tractor

1. Align the tractor drawbar with the machine. Raise or

lower the Hitch, as needed, using the Jack. Attach the
unit with proper size hitch pin.

See Table 3-1.

2. Always rotate Jack to its storage position before

setting the machine in motion.

3. Clean all hydraulic couplings and attach to the tractor.
4. Fully extend the hydraulic lift wheel cylinders, and

place the cylinder lockouts in the Transport Lock
Position over the cylinder rods. Secure the lockouts
with the lockout pins.

5. Attach Safety Chain to tractor allowing plenty of

movement for turning both directions. The safety
chain should latch securely to prevent it coming loose.

See Figure 3-1.

6. Plug in the 7-Pin connector for the lights.

• Make sure the tractor has a good clean

receptacle, free of dirt and corrosion.

• Make sure the 7-Pin connector is inserted ALL the

way in. With tighter fitting pins, operator may think
the connector is all the way in, but really isn’t.

• Make sure the tractor receptacle cover latches

over the keyway on the 7-Pin connector to hold
the connector in place.

• If an operator plugs in the 7-Pin connector, but

the lights do not seem to work right, check the
above items to make sure there is a good
connection with the 7-Pin connector.

Table 3-1: Hitch Pin Size

Figure 3-1: Safety Chain To Tractor

DRAWBAR CAT

Min Pin Size

Max PTO HP

1-14" (30mm)

154 (115 Kw)

1-1/2" (38mm)

297 (185 Kw)

2" (50mm)

402 (300 Kw)

9" MAX

HHCS,1-8 x 3-1/2

Locknut,1-8

Drawbar

Tractor Drawbar

Flat Washer,1" SAE

Safety Chain

HHCS,1-8 x 3-1/2

Drawbar

Tractor Drawbar

Locknut,1-8

Flat Washer,1" SAE

Safety Chain

Содержание Brillion WCC





















































































Результаты поиска

Содержание Brillion WCC

Отзывы:

Похожие инструкции для Brillion WCC

Бренды по названию

Популярные бренды

Landoll Brillion WCC, Руководство оператора

Результаты поиска

Содержание Brillion WCC

Отзывы:

Похожие инструкции для Brillion WCC

Бренды по названию

Популярные бренды