Landoll Brillion WCC Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 84

background image

9J577-0822

3-1

TABLE OF CONTENTS

Chapter 3

Operation

DANGER

DANGER

WARNING

CAUTION

CAUTION

Tractor Preparation

The Brillion Pulvi-Mulcher is designed to be pulled by
tractor equipped with a Drawbar with or without a hummer
strap. Implement Flip Flop Hitch Spade end is CAT 3 and
Clevis end is CAT 2. Optimal Hitch is CAT 3. Before
attaching the implement, prepare the tractor as follows:
1. Inflate the rear tractor tires equally and add ballast

according to the tractor operator’s manual.

2. Lock the Tractor Drawbar in the center position.

Pulvi-Mulcher Preparation

1. Prior to operating the Pulvi-Mulcher, inspect it

thoroughly for good operating condition.

2. Replace worn or missing parts.
3. When the machine is new, check the bolt tightness

after a few hours of operation. Tighten any loose nuts
or bolts. Check the lift wheel lug bolts daily.

4. Check the lift wheel tire inflation. Inflate all tires

equally to avoid side draft. Follow the tire
manufacturer’s recommended pressures listed on the
sidewall of the tires.

Never allow anyone to ride on the W360
Pulvi-Mulcher at any time. Allowing a person to
ride on the machine can inflict serious personal
injury or death to that person.

All hydraulically elevated equipment must have
cylinder lockouts installed or be lowered to the
ground, when servicing or when equipment is idle.
Failure to take preventive measures against
accidental lowering can result in serious personal
injury.

Ensure both Rockshaft Transport Locks are either
locked or unlocked. Failure to lock both Transport
Locks may result in damage to the machine.
Ensure the Drawbar Transport Lock is unlocked
before lowering the machine. Failure to remove
the Pin will result in damage to the drawbar and
frame.

When transporting farm implements on public
roads, it is the responsibility of the operator to
abide by state and local laws concerning wide
loads, speed, safety emblems and safety lighting
equipment. Drive at safe speeds, particularly
when rounding corners, crossing rough ground or
driving on hillsides, to prevent tipping the tractor.

«
...
65
66
67
68
69
...
»

Содержание Brillion WCC





















































































Отзывы:

Нет отзывов

Похожие инструкции для Brillion WCC

Бренд: Omnia Страницы: 8

Бренд: Odom Страницы: 19

Бренд: MacDon Страницы: 30

Бренд: Landoll Страницы: 52

Бренд: Gason Страницы: 110

Бренд: Gainsborough Страницы: 2

Бренд: B&K Страницы: 12

Бренд: Oberheim Страницы: 40

Tetrix 351 AC/DC Smart FW

Бренд: EWM Страницы: 117

Varycolor MICRO 150HTI

Бренд: JB-Lighting Страницы: 18

Бренд: LA Audio Страницы: 9

Бренд: Rapala Страницы: 14

Бренд: S.R.Smith Страницы: 43

Бренд: PAT Страницы: 44

Бренд: Park Tool Страницы: 4

Бренд: Park Central Страницы: 20

Бренд: Qlight Страницы: 4

Бренд: A&D Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды