Landoll Brillion 3631-25, Руководство оператора

Страница: 52 / 138

2-36 F-979-0219
ASSEMBLY
Shank Depth Control Installation
1. If not already done, install Limit Valve, Slide Pad and
Depth Stop Guide to Limit Valve Mount located at the
front of the left side frame cross tube with 5/16-18 x 5
Bolts and Locknuts.
See Figure 2-34.
2. Attach the Depth Stop Clamp on the top of the Middle
Tooth Tube by sliding a Clamp Plate into the Depth
Stop Clamp Slot and under the Tooth Tube.
Assemble 5/8-11 x 5 Bolts and Locknuts,
Do Not
tighten at this time.
3. Slide the Depth Stop Assembly through the Depth
Stop Guide to the Depth Stop Clamp. Position the
Depth Stop Assemble over the Depth Stop Clamp
Lug and align the Top hole of the Depth Stop Clamp
for machines with the 24” Notched Ductile Wheels or
align the Depth Stop Assemble in the Bottom hole of
the Depth Stop Clamp for Machines with the 20”
Notched, 20” Crowfoot
or 20” Optimizer Wheels.
Insert and secure with 5/8-11 x 2-3/4 Bolt and
Flanged Locknut.
See Figure 2-35.
4. Ensure that the Depth Stop Clamp is positioned
correctly and that the Depth Stop Assembly moves
freely when turning the handle and the Shanks raise
and lower.
5. Tighten the Depth Stop Clamp Bolts at this time.
Figure 2-34: Shank Depth Control Installation
'HSWK6WRS
*XLGH
6OLGH3DG
/LPLW9DOYH
'HSWK6WRS&ODPS
&ODPS3ODWH
63'&
%ROW
[
/RFNQXW
%ROW
[
'HSWK
6WRS$VP
/RFNQXW
/RFNQXW)ODQJHG
%ROW
[