Landoll Brillion 3631-25, Руководство оператора, Страница: 131 / 138

MAINTENANCE
F-979-0219 4-9
Storage
1. The service life of the Pulvi-Mulcher will be extended
by proper off-season storage practices. Prior to
storing the unit, complete the following procedures:
a. Completely clean the unit.
b. Inspect the machine for worn or defective parts.
Replace as needed.
c. Repaint all areas where the original paint is worn
off.
d. Grease all exposed metal surfaces of shanks
and points.
e. Apply a light coating of oil or grease to exposed
cylinder rods to prevent them from rusting.
f. Lubricate each point of the machine as stated in
“Lubrication Points and Intervals” on
page 4-4.
2. Store the unit in a shed or under a tarpaulin to protect
it from the weather. The ground tools and tires should
rest on boards, or some other object, to keep them
out of the soil.
3. If the unit is stored in the folded position, make sure
the transport lock pins are installed to prevent
settling.
4. Relieve Hydraulic Pressure in hoses after locks are
installed.
5. Block wheels before unhitching from tractor.
X
Maintenance Chart
Initial Run-In 20 Hours 50 Hours 100 Hours/Annually Storage
Fasteners, Wheel Hub Bolts X X
Grease:
Adjust Scraper if equipped X
Grease Wheel Hub X X
Repack Wheel Hub Bearings X
Tighten Roller Axle
Wheels and Clamps
X X
** Clean machine X
Grease after cleaning X
Touch-up paint
(Subject to change without notice)
** Avoid spraying high pressure washer directly at bearing seals and electrical connections.
Turnbuckle
X