background image

WARRANTY

                                                                                                              

MANU FAC TUR ER’S  GUAR AN TEE  POL ICY

LAN DOLL  COR PO RA TION  WAR RANTY

LAN 

DOLL war 

rants each new and un 

used LAN 

DOLL ma 

chine, when

prop 

erly as 

sem 

bled, ad 

justed, and op 

er 

ated, to be free of de 

fects in

ma te rial and work man ship, in nor mal use and when prop erly serv iced,
for a pe riod of twelve (12) months af ter date of de liv ery by the Dealer to 
the origi nal re tail pur chaser. LAN DOLL shall re pair or re place, at its op -
tion, freight on board (f.o.b.) at its fac tory or des ig nated DEALER lo ca -
tion, any part or parts of such new and un 

used ma 

chine which shall

have been re ported in writ ing to LAN DOLL within thirty (30) days from
date of fail ure thereof and which LAN DOLL in spec tion shall dis close to
have been de fec tive. De fec tive parts must be re turned to the LAN DOLL
fac tory, freight pre paid. LAN DOLL will not be li able for la bor, trans por -
ta tion, or any other charges re sult ing from re place ment of a de fec tive
part. This war ranty is void if any part not sup plied by LAN DOLL is used 
in as 

sem 

bly or re 

pair, or if the ma 

chine has been al 

tered, abused, or

ne 

glected. LAN 

DOLL re 

pair parts are war 

ranted for ninety (90) days

from date of re 

place 

ment or for the un 

ex 

pired war 

ranty pe 

riod of the

ap pli ca ble  LAN DOLL  ma chine,  which ever  pe riod  is  longer.  LAN DOLL
makes no war ranty, what so ever, as to pur chased com po nent parts and
other trade ac ces so ries, ex cept to the ex tent that such items are war -
ranted by the manu 

fac 

turer thereof. THIS WAR 

RANTY IS EX 

CLU 

SIVE

AND IN LIEU OF ALL OTHER WAR 

RAN 

TIES, WHETHER EX 

PRESSED,

IM PLIED,  OR  STATU TORY  (IN CLUD ING  WAR RAN TIES  OF  MER CHANT -
ABIL ITY AND FIT NESS FOR PUR POSE), AND LAN DOLL SHALL NOT BE 
LI ABLE FOR SPE CIAL OR CON SE QUEN TIAL DAM AGES OF ANY KIND
ON AC COUNT OF ANY LAN DOLL PROD UCT.

NO EM 

PLOYEE OR REP 

RE 

SEN 

TA 

TIVE IS AUTHOR 

IZED TO CHANGE

THIS WAR RANTY, VER BALLY OR IN WRIT ING, OR GRANT ANY OTHER 
WAR RANTY.

LAN 

DOLL COR 

PO 

RA 

TION, WHOSE POL 

ICY IS ONE OF CON 

TINU 

OUS

IM PROVE MENT, RE SERVES THE RIGHT TO MAKE CHANGES WITH OUT 
OB LI GA TION  TO  MOD IFY  PRE VI OUSLY  PRO DUCED  EQUIP MENT.

Содержание 2220 Series



















































Отзывы: