Landmann BLACK DOG 42 XT, Руководство по сборке и эксплуатации

Страница: 10 / 22

ASSEMBLY INSTRUCTIONS
Page 10
STEP 3: ASSEMBLE BACK PANEL
Align back panel with the leg and leg connector
threaded inserts. Assemble the back panel [ M ] to the
legs [ B, C ] and back leg connector [ F ] using (9)
12MM bolts [ AG ]. Tighten all bolts securely.
Handle parts with care,
some parts are sharp or have sharp edges.
The additional tools needed to
assemble the Black Dog 42 XT are an
adjustable wrench, Phillips
screwdriver and a slotted screwdriver.
PART F HAS A TOTAL OF 8
THREADED INSERTS
BLACK DOG 42 XT GRILL & SMOKER
MODEL 590135
®
™
STEP 1: ASSEMBLE THE LEG CONNECTORS
TO THE LEGS
Stand leg [ B ] upright as shown and assemble the
back leg connector [ F ] using (1) 40MM bolt [ AF ].
Next, assemble the front leg connector [ E ] to leg
[ B ] using (1) 60MM bolt [ AE ]. Finger tighten the
bolts only at this time.
Assemble leg connector [ F ] to leg [ C ] using (1)
40MM bolt [ AF ]. Assemble leg connector [ E ] to leg
[ C ] using (1) 60MM bolt [ AE ].
Hold the leg connectors in the correct orientation and
tighten all bolts securely.
STEP 2: ASSEMBLE LEFT PANEL, RIGHT
SMOKE ACCESS PANEL & VENT
Assemble the right smoke access panel [ L1 ] to leg [ B ]
using (2) 12MM bolts [ AG ].
Assemble the left panel [ K ] to leg [ C ] using (2) 12MM
bolts [ AG ].
Assemble the air vent [ W ] to panel [ K ] using (1) 12MM
bolt [ AG ], lock washer [ AB ] and hexnut [ AC ].
Tighten all bolts securely.
C
B
E
F
AE
AE
AF
AF
B
K
W
AB
AC
AG
M
AG
C
3
STEP
2
STEP
1
STEP
TIP
PART E HAS A TOTAL
OF 5 THREADED INSERTS
TIP
AG
For easier reading and visual reference,
part letters are described in either black or
gray circles in each step.
K
AG
Black circle part letters are
parts added for the step.
Gray circle part letters are
reference parts for the step.
EXAMPLE:
EXAMPLE:
CAUTION!!
!
C
B
F
L1