Landmann BLACK DOG 42 XT, Руководство по сборке и эксплуатации

Страница: 17 / 22

ASSEMBLY INSTRUCTIONS
Page 17
BLACK DOG 42 XT GRILL & SMOKER
MODEL 590135
®
™
STEP 19: ASSEMBLE LID HANDLES,
VENTS & TEMPERATURE GAUGES
Check temperature gauges for accuracy by
comparing the reading to the current air
temperature. If the needle is not displaying the
correct temperature, use a slotted screwdriver to
very slowly turn the probe end to adjust the
needle to the current air temperature. Generally
if adjustment is needed, the probe will only need
to be slightly turned. SEE STEP 19A.
Do not turn the probe more than is
needed or the calibration will be damaged!
Remove hexnut from the temperature gauge
[ X ] probe and assemble to the smoker chamber
lid [ A ] and firebox lid [ CA ] with the hexnut.
Align the gauge and tighten securely.
Assemble (1) handle [ AA ] to the smoker
chamber lid [ A ] and (1) handle [ AA ] to the
firebox lid [ CA ] using (2) 8MM bolts [ AH ] per
handle.
Assemble the air vent [ W ] to the smoker
chamber lid [ A ] sides using (1) 12MM bolt [ AG ],
lock washer [ AB ] and hexnut [ AC ]. Note the
vent plate on the right side is pre-assembled.
This vent is not used and acts as a blocking plate
only.
TO ADJUST THE TEMPERATURE NEEDLE, USE A
SLOTTED SCREWDRIVER TO TURN THE PROBE
X
BACKSIDE
STEP 20: ASSEMBLE DOORS, ASH
TRAY, DOOR LATCH & HANDLES
Assemble the doors [ J, H ] into the door
frame panel [ G ] tubes.
Slide the ash tray [ P ] into the cavity about
3/4 of the way.
Assemble (3) handles [ AA ] to the doors and
ash tray [ J, H, P ] with (2) 8MM bolts [ AH ]
per handle.
Assemble the door latch [ Z ] to the door [ J ]
with (1) 12MM bolt [ AG ], lock washer [ AB ]
and hexnut [ AC ].
Be sure to tighten all bolts securely.
20
STEP
X
W
AB
AC
AG
AA
AH
A
19A
STEP
19B
STEP
X
AA
CA
AH
G
TUBES
AB
AC
H
J
P
Z
AA
AH
AA
AG
AH
AA
AH
CAUTION!