12
M6x12 bolt
3 required
Proper igniter wire connection
Assembly Step 5
Phillips Head
Screwdriver
Proper fit between
burner and brass
valve stem
1. Set the burner assembly onto the cabinet as shown.
IMPORTANT: The burner tube must slide properly onto the brass valve stem as shown below. An
improper fit will result in poor gas flow and operation of the smoker.
2. Secure the burner assembly with the three (3) bolts from the inside of the cabinet that will attach
directly to the burner assembly. Securely tighten the bolts.
3. Attach the loose igniter wire to the igniter on the control panel as shown.
Hardware Bag
C
Содержание 3875GWLACR
Страница 29: ...29...