19
Hardware Bag
J
Assembly Step 12
Insert the R-Hook into the
pre-threaded mount on the
front legs as shown. And
firmly tighten it.
Using the zip tie, secure the hose to the front
leg as shown. Do not pull the zip tie tight -
leave it just lose enought so the hose can be
adjusted if needed.
Tying the hose to the leg helps prevent the
hose from coming into contact with the hot
burner chamber. Inspect the installation
underneath the smoker to ensure the hose is
not rubbing any position of the burner chamber.
1. Place one end of the S-hook aroung the
regulator neck or throught the eyelet as
shown.
2. Using a set of pliers, crimp the S-hook
securely to the HVR so it can not be
removed from the HVR.
3. When the LP tank is not attached to the
smoker, use the S-hook to hand the HVR
on the side handle of the smoker. This
will help prevent dirt and other particles
from plugging the end of the HVR.
Assembly is now complete! Please follow all instructions and safeguards
on the following pages for connecting the LP tank.
Содержание 3875GWLACR
Страница 29: ...29...