Landis S755 XL (G2), Руководство оператора

Страница: 8 / 28

Operator Manual S755 (G2) / S755 XL (G2) October 2017
Landis International - 8
4. Rotate the Naumkeag head by hand to see that the sanding pad is not
damaged and the shaft is not bent.
• AS WITH ANY PIECE OF ELECTRICAL EQUIPMENT, THERE IS AN EVER PRESENT HAZARD OF ELECTRICAL
SHOCK WHEN OPERATING OR TOUCHING THE FINISHER. ENSURE THE MACHINE IS PROPERLY GROUNDED
AT ALL TIMES.
• DO NOT FORCE THE EQUIPMENT. IT WILL DO THE JOB BETTER AND SAFER AT THE RATE FOR WHICH IT WAS
DESIGNED.
BEFORE STARTING THE SANDING BELT MOTOR, CHECK THAT THE SANDING BELT
IS TRACKING PROPERLY, AS FOLLOWS
1. “Jog” the sanding belt motor by quickly hitting the “start”
then “stop” button such that the belt turn slowly, then
stop.
2. Continue jogging the motor and check the belt to see
that it stays roughly centered on its forward pulley.
3. Tracking adjustment handle is located to the left of the sanding
belt:
A. Clockwise rotation of the adjustment moves the
belt to the left
B. Counterclockwise rotation moves the belt to the right.
Adjust accordingly as required so that the belt is
tracking properly while running slowly.
4. Start completely the sanding motor. Fine adjust the tracking
of the belt at full speed.
• AS THE INDIVIDUAL SANDING BELTS WEAR FROM USE, IT WILL BECOME
NECESSARY TO MAKE MINOR TRACKING ADJUSTMENTS TO KEEP THE SANDING
• BELTS CENTERED.
Tracking adjustment
B
A