Landis S755 XL (G2), Руководство оператора

Страница: 11 / 28

Operator Manual S755 (G2) / S755 XL (G2) October 2017
Landis International - 11
TRIMMER SECTION
TO REMOVE THE SOLE CUTTER
1. You will need to use the lock tool at first to secure
and lock the shaft. (SKU: TBSHC)
2. Remove the cutter retaining screw
(left hand thread), (SKU: 83102220) and the washer
(SKU: F33116).
3. Pull cutter off the shaft.
4. To reassemble, reverse procedures.
TO REMOVE THE HEEL CUTTER
1. You will need to use the lock tool at first to secure and lock the
shaft. (SKU: TBSHC)
2.
Unscrew the black knob at the back of the guard and remove
it by sliding to the left.
3. Remove the cutter retaining screw (left hand thread),
(SKU: 83102220) and the washer (SKU: SCT).
Wear protective gloves to manipulate the cutter. Retain the
retaining rod (SKU: TBSHC) and make a rotation towards the
bottom to remove the cutter on bayonet.
4. To reassemble, reverse procedures.