Landis S755 XL (G2), Руководство оператора

Страница: 21 / 28

Operator Manual S755 (G2) / S755 XL (G2) October 2017
Landis International - 21
MONTHLY
MAINTENANCE
RUBBER SANDING PULLEY
1. Check the rubber sanding pulley ’ s surface for any accumulation
of dust.
2. Clean if necessary with an air jet.
3. Replace the wheel if worn.
RUBBER/FELT SANDING WHEEL
Check the rubber/felt sanding wheel surface for any accumulation of dust. Clean if
necessary with air jet and a scraper. Replace the wheel if worn.
TRIMMER, MINI BELT & BACK FILTERS
To prolong the life of your trimmer clean with an air jet.
DUST DAMPERS
Check for proper opening and closing of all dust dampers,
removing and cleaning any accumulation around the openings.
V-BELT TENSION
1. Check tension and adjust if necessary
2. Disconnect the electrical power supply.
3.
Check the tension of the V-belt running to the motor; it should
depress approximately 12
mm (½”) when pressed in the middle
with moderate force.
4.
Rotate the V-belt by hand, visually inspecting the belt for damage.