Landis S-500, Руководство оператора

Страница: 8 / 32

7
2.
Release pressure on the belt by pushing the grey handle
located in front of the machine.
3.
Reach in access door and remove the far end of the belt off
the idler first.
4.
Remove built-up dust on the rubber sanding wheel and on the
idler drum.
5.
To install the new sanding belt, reverse the procedure described above, then readjust
the tracking as described earlier in section “start-up”.
TO REPLACE 4” WIDE BELT ON LEFT SIDE:
1.
Open left sanding belt door.
2.
Release pressure on the belt by pulling the grey handle located
in front of the machine.
3.
Reach in access door and remove the far end of the belt off
the idler first.
4.
Remove built-up dust on the rubber sanding wheel and on the idler drum.
5.
To install the new sanding belt, reverse the procedure described above, then readjust
the tracking as described earlier in section “start-up”.
TO REPLACE 4” WIDE BELT ON RIGHT SIDE:
1.
Open sanding belt door.
2.
Release pressure on the belt by pushing the grey handle.