Landis S-500, Руководство оператора

Страница: 6 / 32

5
2. Ensure workers are a safe distance from any potential hazard.
3. The lock and tag should be removed from each energy-isolating device by the worker
who applied the lock and tag.
4. Notify affected workers that locks and tags have been removed.
START-UP
EYE PROTECTION SHOULD ALWAYS BE WORN BY THE OPERATOR AND OTHERS IN THE WORK AREA WHEN SETTING UP
THE MACHINE. EYE PROTECTION IS REQUIRED FOR PROTECTION FROM FLYING DEBRIS AND DUST, WHICH COULD
CAUSE EYE INJURY.
Before shipment, your Landis Sander was checked at the factory for proper adjustment and
operation. However, due to the possibility of jarring or damage during handling and
shipping, it is necessary to check that the machine is in proper working order before use.
BEFORE INITIAL START UP, TURN SANDING BELTS BY HAND TO ENSURE THAT ALL PARTS ARE FREE. DO NOT START
SANDER BEFORE CHECKING FOR PROPER SANDING BELT TRACKING.
BEFORE CONNECTION TO AN ELECTRICAL POWER SUPPLY:
1. Check that the switch is off.
2.
Rotate the sanding belts to see that all parts are free and not binding. Continue for one
complete rotation of the sanding belt, checking both belts for tears or other damage.
You can tell that one complete revolution has been made when the joint of the sanding
belt has gone by the front pulley twice.
AS WITH ANY PIECE OF ELECTRICAL EQUIPMENT, THERE IS AN EVER PRESENT HAZARD OF ELECTRICAL SHOCK WHEN
OPERATING OR TOUCHING THE SANDER. ENSURE THE MACHINE IS PROPERLY GROUNDED AT ALL TIMES.
DO NOT FORCE THE EQUIPMENT. IT WILL DO THE JOB BETTER AND SAFER AT THE RATE FOR WHICH IT WAS DESIGNED.