Recumbent Assembly Instructions
STEP 1:
Carefully make the
harness connection at the
base of the recumbent
tower to the frame.
STEP 3:
Use a 5/8” socket wrench
to secure 4 bolts and 4 lock
washers at the base of the
tower.
STEP 2:
Push the harness
connection into the tower
to avoid any pinching
damage as you align the
tower into position.
STEP 4:
Place tower base cover in
position.
STEP 6:
Place seat back support in
position with 4 socket head
screws and 4 lock washers.
STEP 5:
Secure tower base cover
with 2 Philips head screws.
STEP 7:
Install rear seat cover with
3 Philips head screws.
STEP 9:
Install seat back with 4
silver button socket head
screws and 4 flat washers.
STEP 8:
Install front seat cover with 3
Philips head screws.
STEP 10:
Press 4 black finishing plugs
over the four button head socket
screws installed in the previous
step. Assembly is now complete.
3
