Landice 90 Series, Руководство пользователя

Страница: 66 / 114

Cardio Treadmill Operation
66
Note: Pressing ENTER toggles between speed, incline and time
values for the current segment. To change segments,
press either arrow. You can change segments in either the
forward of reverse direction.
5. Use the numeric keypad to change the value and press
ENTER . Continue to another segment by pressing the
appropriate arrow key.
6. If you want a program to
have less than 20
segments, create the last
segment with 0 in the time
field. The time reads END.
The program ends when it
reaches this segment.
7. When you finish editing your
User-Defined Program, you can begin your program by
pressing
START .
Note: If you attempt to advance the cursor past the 20th
segment, you are prompted with PRESS START TO BEGIN
OR ENTER TO EDIT. You can also exit Edit Mode by
pressing MANUAL MODE or PROGRAMS at any time.
5.5.1. Learn Mode
When you run a User-Defined Program and the speed or
incline is adjusted, the treadmill saves the last change to the
current segment.
Note: Learn Mode allows you to adjust existing segments in your
user program, but you cannot add segments to it in Learn
Mode.