Landice 90 E7, Руководство пользователя

Страница: 42 / 74

Operation: Cardio Control Panel
42
7. When you finish editing your User-Defined Program, you
can begin your program by pressing START or DONE .
Note: If you attempt to advance the cursor past the 20th
segment, you are prompted with PRESS START TO BEGIN
OR EDIT TO SET UP. You can also exit Edit Mode by
pressing
MANUAL MODE
or
PROGRAMS
at any time.
3.5.2. Learn Mode
When you run a User-Defined Program and the effort is
adjusted, the elliptical saves the last change to the current
segment.
Note: Learn Mode allows you to adjust existing segments in your
user program, but you cannot add segments to it in Learn
Mode.
1. Start a workout, then press
PROGRAMS
to display the
Programs selection screen.
2. Scroll through the program options by pressing
PROGRAMS or use the arrow keys. When the USER
PROGRAM PREVIEW you desire is shown, press
ENTER
.
3. Press START to begin your program. When you begin, the
Program Progress Detail screen is displayed. The effort
and time values of your current segment are displayed in
the center. To change the effort of your current segment,
press the
EFFORT (+/– ) keys. The modified segment is
stored with these new settings for the next time you run this
program.