Cyclops 160B
User Guide
Page 37
14 User Configuration Record
The
Cyclops 160B
can be configured to suit your measurement
requirements. Your chosen parameter settings and values are stored in the
thermometer’s memory.
If the thermometer is returned to Land Instruments for repair or recalibration,
it is possible that your stored user settings may be overwritten and the
thermometer returned to you with the factory default settings.
Therefore, it is recommended that once you have set up the thermometer
to match your measurement requirements, you use the User Configuration
Record to make a note of your chosen parameter settings and values, so that
these can be re-entered into the thermometer and used again.
Serial Nº
.............................................................
Date:
.............................................................
Measurement Mode:
Peak
q
Instantaneous
q
Averaged
q
Valley
q
Menu Mode:
Emissivity (value) ....................
Data Output Mode:
Classic
q
Historic
q
Burst
q
Alarm Settings:
Alarm off
q
High alarm
q
(value) ....................
Low alarm
q
(value) ....................
Averager setting:
Slow
q
Mid
q
Fast
q
Temperature units:
°C
q
°F
q
K
q
°R
q
Backlight Setting:
Off
q
Dim
q
(timer) ....................
Bright
q
(timer) ....................
Sounder Setting:
Off
q
On
q
Window transmission:
Off
q
On
q
(value) ....................
Bluetooth
:
Off
q
On
q