Cyclops 160B
User Guide
Page 18
(l)
(m)
(n)
Units
This menu allows you to select the unit of measurement. There are four
options:
°Celsius
(l),
°Fahrenheit
(m),
°Rankine
(n) and
Kelvin
(o). The
default setting is
°C
.
(o)
(p)
(q)
(r)
Backlight
This option allows you to control the brightness of the side display backlight.
There are three backlight options available:
High
(p),
Low
(q) and
Off
(r). When High or Low are selected, a sub-menu appears in which you can
specify a time limit (in seconds) after which the backlight turns off if the
thermometer is inactive. The default setting is
Off
.
Note:
Use of the backlight will reduce the life of the battery. It is
recommended that the backlight is switched off when not required.
(s)
(t)
Sounder
This option allows you to either switch on or mute the sounder. When
switched on, the sounder indicates trigger operation, alarm trip, active
communications response, and lost communications response (
Bluetooth
).
The available sounder options are:
Sounder On
(s), or
Sounder Off
(t). The
default setting is
On
.
(i)
(j)
(k)
Averager time constant
The averager time constant function allows you to set the rate of averaging of
the temperature values taken. There are three options:
Fast
(i),
Mid
(j) and
Slow
(k). The default setting is
Mid
.