background image

2

Important Safety Information

SPL0548 & SPL0560 Snow Pusher   303-454M

Table of Contents

9/07/16

These are common practices that may or may not be applicable to the products described in 
this manual.

Use A Safety Chain

A safety chain will help control 
drawn machinery should it 
separate from the tractor drawbar.

Use a chain with the strength 
rating equal to or greater than the 
gross weight of the towed 
machinery.

Attach the chain to the tractor 
drawbar support or other specified 
anchor location. Allow only 
enough slack in the chain to 
permit turning.

Do not use safety chain for towing.

Tractor Shutdown 
And Storage

Before leaving operator’s 
seat:

If engaged, disengage PTO.

Lower attachment to ground or 
onto support blocks.

Put tractor in park or set park 
brake, turn off engine, and remove 
switch key to prevent unauthorized 
starting.

Wait for all components to come to 
a complete stop before leaving the 
operator’s seat.

Detach and store attachment in an 
area where children normally do 
not play. Secure attachment using 
blocks and supports.

OFF

REMOVE

Practice Safe Maintenance

Understand procedure before doing 
work. Use proper tools and 
equipment, refer to Operator’s 
Manual for additional information.

Work in a clean dry area.

Lower attachment to the ground 
and follow all shutdown procedures 
before leaving the operator’s seat to 
perform maintenance.

Allow equipment to cool before 
working on it.

Disconnect battery ground cable (-) 
before servicing or adjusting 
electrical systems or before welding 
on attachment.

Do not grease or oil attachment 
while it is in operation.

Inspect all parts. Make certain 
parts are in good condition & 
installed properly.

Replace parts on this attachment 
with genuine Land Pride parts only. 
Do not alter this attachment in a 
way which will adversely affect its 
performance.

Remove buildup of grease, oil, or 
debris.

Remove all tools and unused parts 
from equipment before operation.

Maximum transport speed for an 
attached implement is 20 mph. DO 
NOT EXCEED. Never travel at a 
speed which does not allow 
adequate control of steering and 
stopping. Some rough terrains 
require a slower speed. 

As a guideline, use the following 
maximum speed weight ratios for 
an attached implement:

20 mph

 when weight of attached 

implement is less than or equal to 
the weight of machine towing the 
implement.

10 mph

 when weight of attached 

implement exceeds weight of 
machine towing implement but 
not more than double the weight.

IMPORTANT:

 Do not tow a load 

that is more than double the weight 
of the machine towing the load.

Transport 
Machinery Safely

Comply with state and local laws.

Use towing vehicle and trailer of 
adequate size and capacity. 

Secure equipment towed on a 
trailer with tie downs and chains.

Sudden braking can cause a trailer 
to swerve and upset. Reduce 
speed if trailer is not equipped with 
brakes.

Avoid contact with any over head 
utility lines or electrically charged 
conductors.

Engage park brake when stopped 
on an incline.

Содержание SPL0548



























Отзывы: