background image

12

Section 2: Operating Procedures

SPL0548 & SPL0560 Snow Pusher   303-454M

Table of Contents

9/07/16

Section 2: Operating Procedures

Operator’s Responsibilities

Hazard control and accident prevention are dependent 
upon the awareness, concern, prudence, and proper 
training involved in the operation, transport, storage, and 
maintenance of the Snow Pusher. Therefore, it is 
absolutely essential that no one operates this attachment 
without first having read, fully understood, and become 
totally familiar with the Operator’s Manual. Make sure the 
operator has completed the Operating Checklist below.

Safety Information

!

DANGER

Allow only persons to operate this attachment who have fully 
read and comprehended this manual and who have been 
properly trained in the safe operation of this attachment. 
Serious injury or death can result from the inability to read, 
understand, and follow instructions provided in this manual.

!

DANGER

Operate only on tractors equipped with a Roll-Over 
Protective Structure and seat belt. Fasten seat belt snugly and 
securely to help protect against serious injury or death.

!

DANGER

Do not get pinned between loader arms and tractor frame. 
Loader arms and attachment can crush causing serious injury 
or death to the operator and/or anyone nearby.

• Always operate attachment seated on the tractor with seat 

belt fastened around operator.

• Keep your head, arms, and legs away from the loader lift arms 

while seated on the tractor.

• Do not allow bystanders to be near the attachment, loader 

arms, and tractor while operating the tractor.

• Before leaving the operator’s seat, lower attachment to the 

ground, place gear selector in park or set park brake, turn off 
engine, and remove switch key.

!

DANGER

Keep away from electrical power lines. Place an orange 
warning sign under overhead power lines indicating type of 
danger above. Electrocution is often fatal.

Operating Checklist

Check

Page

Read and follow all safety rules carefully. 
Refer to “Important Safety Information”.

1

Read and follow hook-up instructions. 
Refer to “Hook-Up" instructions.

9 & 10

Read and follow all safety & operating instructions. 
Refer to “Section 2: Operating Procedures”.

12

Read and follow all maintenance instructions. 
Refer to “Section 3: Maintenance”.

14

Check 

unit 

initially and periodically for loose bolts. 

Refer to “Torque Values Chart”.

20

!

WARNING

The Snow Pusher is back heavy and can tip over backwards 
easily once unhooked. Always unhook unit on level ground 
with support blocks under the skid shoes at the back to tip the 
unit forward. Never unhook unit with back of unit facing 
downhill.

!

WARNING

Avoid hitting solid objects with this attachment as it does not 
have a trip mechanism. Solid objects can damage equipment 
and throw operator forward causing loss of control and injury. 
Always wear the seat belt when operating this attachment.

!

WARNING

Check hitch hook-up points frequently to make sure the 
attachment is properly hooked-up to the loader hitch. An 
improper fit-up can result in the attachment detaching from 
the tractor causing a serious injury or death.

!

WARNING

To avoid serious injury or death:

• Do not allow anyone to operate this attachment who has not 

been properly trained in its safe operation or anyone who is 
under the age of 16.

• Never carry riders on the tractor or attachment. Riders can be 

struck by foreign objects, pinched by moving components, 
thrown by sudden shifts in movement, entangled in rotating 
components, can fall from equipment, or can obstruct the 
operator’s view causing serious injury or death.

• Use steps, grab-handles, and skid-resistant surfaces when 

getting on or off the tractor. Using unapproved surfaces and 
handles to mount and dismount can result in a falling hazard 
and cause serious injury or death.

!

WARNING

To avoid serious injury or death, use Snow Pusher for its 
intended purpose only. 

• Use Snow Pusher to move snow and loose materials only. 

Never use Snow Pusher to cut into soil, rock, or other 
compacted surfaces and never use it to push, pull, lift, tow, or 
carry solid objects such as fence posts, stumps, rocks, etc. 

• Never use Snow Pusher as a working platform or as a means 

to raise and lower personnel.

• Doing any of the above could result in loss of tractor control, 

tractor rollover, equipment damage, falling hazard, and/or 
crushing hazard.

!

CAUTION

Read and obey all instructions on the safety labels. Make sure 
they are installed in their proper location and are in good 
condition before operating the attachment.

Содержание SPL0548



























Отзывы: