Land Pride RC4615 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 68

background image

Section 4: Options & Accessories

Table of Contents

8/22/23

RC4615 & RCM4615 Rotary Cutters 331-644M

40

Section 4: Options & Accessories

Safety Guard

DANGER

!

To avoid serious injury or death:

Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front & rear safety guards is
mandatory with this cutter. Double row chain guards should
be used when cutting along roadways and in areas where
people may be present. Stop blade rotation if bystanders are in
or around the area. It is recommended that a safety shield be
placed between the operator and cutter on an open air tractor.

Land Pride offers two types of safety guards to best suit
your application: single row chain guards and double row
chain guards.

•

Single row chain guards are constructed with a single
row of hanging chain links. They can withstand harsher
applications than rubber skirts.

•

Double row chain guards are constructed with two
staggered rows of hanging chain links. The second row
provides an additional barrier for stopping thrown
objects.

Single Chain Guards

330-481A

Front Single Row Chain Guards

330-493A

Rear Single Row Chain Guards

Double Chain Guards

330-483A

Front Dual Chain Guards

330-495A

Rear Dual Chain Guards

Tire and Axle Options

Land Pride offers four different tire options and two axle
arrangements to best suit your application:

•

Laminated tires: They are constructed of laminated
layers of solid rubber that will never go flat.

•

New tires: They are available in foam filled and air
filled. Both are built tough to withstand the rugged use
a cutter receives and to provides a smoother ride when
transporting. Foam filled tires won’t go flat.

•

Used aircraft tires: They are built tough to withstand
the rugged use a cutter receives and to provide a
smoother ride when transporting.

•

6 - Wheel standard axle arrangement: Four on
transport axle and one on each wing axle.

•

8 - Wheel standard axle arrangement: Four on
transport axle and two on each wing axle.

Hitch Options

330-498A

Standard Clevis Hitch

330-333A

Bar-Tite Hitch (Optional)

330-335A

Ball Hitch (Optional)

330-501A

Pintle Hitch (Optional)

334-045A

LP Performance Hitch (Optional)

The cutter is factory supplied with the standard clevis
hitch. Other optional hitches are available. See

on page 15 for complete description of optional

hitches.

«
...
42
43
44
45
46
...
»

Содержание RC4615





































































Отзывы:

Нет отзывов

Похожие инструкции для RC4615

Бренд: Tascam Страницы: 128

Бренд: ParaBody Страницы: 6

Бренд: Maeda Страницы: 276

Бренд: Safavieh Страницы: 2

Бренд: Vendlet Страницы: 2

Бренд: Mako Страницы: 17

BOS R254K-UUI-LH10-S4

Бренд: Balluff Страницы: 12

Бренд: Zero88 Страницы: 26

Бренд: HAMOKI Страницы: 7

Бренд: H&S Страницы: 56

Бренд: Carbatec Страницы: 29

Бренд: PurAthletics Страницы: 2

LED Niova 150-F Pro 150W Bi Color

Бренд: Walimex Pro Страницы: 56

Бренд: Sport-thieme Страницы: 20

Бренд: Conductix-Wampfler Страницы: 12

Flumen OPTI-TR 22

Бренд: Wilo Страницы: 88

Бренд: Laserworld Страницы: 4

Matrix N Series

Бренд: Datalogic Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды