Land Pride 3P1006NT Скачать руководство пользователя страница 90

Страница: 90 / 92

Warranty

Table of Contents

3P1006NT 313-521M

2019-07-18

Model Number: _____________________

Serial Number: _______________________________

38112

Warranty

Land Pride warrants to the original purchaser that this Land Pride unit will be

free from defects in material and workmanship for a period of one year from the

first use date when used as intended and under normal service and conditions for

personal use; ninety days for custom/commercial or rental use. This Warranty is

limited to the replacement of any defective part by Land Pride and the

installation by the dealer of any such replacement part. Land Pride reserves the

right to inspect any equipment or part which are claimed to have been defective

in material or workmanship.
The following items and/or conditions are

not covered under warranty

failures resulting from abuse or misuse of the equipment, failures occurring as a

result of accidental damage or acts of God, failures resulting from alterations or

modifications, failures caused by lack of normal maintenance as outlined in the

operator’s manual, repairs made by non-authorized personnel, items replaced or

repaired due to normal wear (such as wear items and ground engaging

components), repeat repair due to improper diagnosis or repair by the dealer,

temporary repairs, service calls and/or mileage to and from customer location,

overtime premium, or unit hauling expenses. The warranty may be voided if the

unit is towed at speeds in excess of 20 miles per hour (32 kilometers per hour),

or is used in soils with rocks, stumps, or other obstructions.
Land Pride reserves the right to make changes in materials or design of the

product at any time without notice. The warranty shall not be interpreted to

render Land Pride liable for damages of any kind, direct or consequential or

contingent to property. Furthermore, Land Pride shall not be liable for damages

resulting from any cause beyond its control. This warranty does not extend to

crop loss, losses caused by planting or harvest delays or any expense or loss of

labor, supplies, rental machinery, or for any other reason.
No other warranty of any kind whatsoever express or implied, is made with

respect to this sale; and all implied warranties of merchantability and fitness for

a particular purpose which exceed the obligations set forth in this written

warranty are hereby disclaimed and excluded from this sale.
This warranty is not valid unless the unit is registered with Land Pride within 10

days from the date of the original purchase.

Содержание 3P1006NT





























































































Результаты поиска

Содержание 3P1006NT

Отзывы:

Похожие инструкции для 3P1006NT

Бренды по названию

Популярные бренды

Land Pride 3P1006NT, Руководство оператора

Результаты поиска

Содержание 3P1006NT

Отзывы:

Похожие инструкции для 3P1006NT

Бренды по названию

Популярные бренды