Land Pride 3P1006NT Скачать руководство пользователя страница 26

Страница: 26 / 92

Operating Instructions

Table of Contents

3P1006NT 313-521M

2019-07-18

Caster Pivot Locks

To prevent side movement of the drill when transported

by trailer, the lift

assist casters may be locked in their

full

reversing orientation.

Use this feature only for trailer transport. Do not use

these locks for semi

mounted 3

point towing or field

operations.

Locking Casters

Refer to Figure 10

1. With drill hitched, raise both tractor 3

point lift arms

and lift assist (page 20). Install lift lock channel .

2. Pull or back drill onto trailer bed.
Note: On extremely narrow trailer beds, it may be

necessary to lock the casters before moving the

drill onto the trailer. Make sure drill is precisely

aligned for the final move, as maneuverability is

greatly reduced with lock pins in place.

3. On both casters lift and turn spring loaded lock pin

plungers 90 degrees. Move in reverse, lock pins

snap into place in the caster plate cutouts when

aligned under each lock tube.

4. Lower drill.

Unlocking Casters

Refer to Figure 10

1. Hitch drill before unlocking.
2. Leave the lock pins in place until the drill is

removed from the trailer, unless the trailer bed has

more than ample width to permit casters to safely

make a full turn.

3. Lift lock pins out of lock plate holes and turn 90

degrees to hold in the unlock position.

848-339C

TO PREVENT POSSIBLE EQUIPMENT DAMAGE:

THE TRANSPORT LOCKS ARE TO BE USED ONLY
FOR LOADING/UNLOADING ON TRAILERS.
USING THEM IN OTHER SITUATIONS COULD LEAD
TO LIMITED MANUVERABILITY IN TRANSPORTATION.

CAUTION

Figure 10

Caster Pivot Locked

32058

Содержание 3P1006NT





























































































Результаты поиска

Содержание 3P1006NT

Отзывы:

Похожие инструкции для 3P1006NT

Бренды по названию

Популярные бренды

Land Pride 3P1006NT, Руководство оператора

Результаты поиска

Содержание 3P1006NT

Отзывы:

Похожие инструкции для 3P1006NT

Бренды по названию

Популярные бренды