Page 26
Following initialisation a new removable drive will appear on the PC, in this case
„PipeCheck (
I
:)“
.
By opening the drive, the files will be
displayed:
The file names correspond to the
contents:
PCHECK.CFG
Contains information about how to name data points and
should not be edited . In the event that this file is accidentally
deleted, the
PipeCheck
plus
will automatically create a new file
and begin naming data points from 1 onwards.
CU.CSV
Contains stored CU measurement data.
GPS.CSV
Contains stored GPS data.
HDWCSV
Contains stored HDW measurement data.
NICR.CSV
Contains stored NiCr measurement data (see page 12).
F-ORT.CSV
Contains stored fault locations (see page 17).
INFOTEXT.TXT
Contains info texts for measurement points. This file can be
edited freely (see page27).
The measurement files to be archived can now be copied to any directory on
the hard disk or opened directly for evaluation.
