Page 14
Fault detection (for NiCr measurements only)
Pressing the „
“ soft key in the single measuring mode activates the fault
detection mode (for NiCr measurements only - during other measurement pro-
cedures this point is skipped and the “Read stored data” mode is called up
instead).
After the fault detection mode has been
selected the corresponding measurement
screen will appear.
Press the “Start” soft key to start the mea-
surement.
The display for selecting the measurement
method appears.
The “Automatic” measurement method
automatically performs the necessary fault
detection measurements one after another
and then displays the measurement result.
For
experienced measurement technicians
the
PipeCheck
plus
has an option to
perform fault detection measurements in individual steps. This allows for a
detailed assessment of the measurement results.
The measurement method can be selected by pressing the „
“ soft key. Press
the “OK” soft key to select the measurement method underlaid with the dark
background that is marked with a “>”.
Automatic measurement
The
PipeCheck
plus
now automatically
continues to perform the necessary fault
detection measurements one after another
and then displays the measurement result.
During measurements the element voltage
Ux can be displayed by pressing and hol-
ding down the “Ux” soft key.
The presence of an element voltage can be
an indication of moisture in the insulation
layer.
