Page 25
How to transfer measurement data to a PC
All measurement values and GPS data stored on the PipeCheck’s SD memory
card exist in two tables and in CSV format (comma separated values). These
can be interpreted by spreadsheet programs, such as MS Excel.
Data transmission via USB cable
•
Connect the USB cable (14)
To do this, disconnect the sensor wire
and mains plug, if they are still connected
to the device, now insert the cable’s mini
plug into the USB interface (5) on the
PipeCheck’s underside.
5 14
Connect the plug at the cable’s other end
to one of the PC’s free USB ports.
The
PipeCheck
plus
starts up automatically.
The data connection will be shown on the
PipeCheck’s display.
The battery is charged at the same time.
The
PipeCheck
plus
appears as a USB drive
of the PC.
Important!
A joint operation of sensor wire, mains plug and USB cable is not
intended. The sensor wire and mains plug must be disconnected.
How to transfer data via a card reader
• Remove the SD memory card (6) from the
card slot on the device’s front side by
pressing on the SD card.
• Slide the SD memory card into the
appropriate slot on a card reader.
