Page 24
LED light
For work in poorly lit areas the
PipeCheck
plus
is fitted with an illuminated display
and an LED light.
The display light comes on automatically with each keystroke for a period of 5
minutes.
For workplace illumination, for example
when connecting the measuring cable, the
LED light on the PipeCheck’s front side can
be switched on and off by briefly pressing
the power switch (
2
).
2
How to charge the rechargeable battery
The
PipeCheck
plus
is fitted with an inte-
grated rechargeable battery. The charge
level appears in the top right-hand corner
of the display (
1
).
To charge the rechargeable battery connect
the supplied mains charger (
15
) to the
device’s charging socket (
7
) and an electri-
cal outlet or connect the USB cable (
14
) to
the USB interface (
5
).
The charging process is indicated by the lit
15
7
8
up red and green diodes on the charge indicator (
8
) next to the charging socket
(
7
). If the device is switched on during charging, the charge indicator bar will
move from empty to full on the display (
1
). When charging via USB cable, the dis-
play is always automatically switched on and the charging capacity is displayed.
When charging is complete,
• The
green diode
(
8
)
will light up
(the charging voltage is connected),
• The
red diode
(
8
)
will go out
(if the device is switched off),
• The
battery charge indicator
will not move (on the display (
1
) ) (if the device
is switched on).
• The
capacity indicator shows 100%
(on display (1), charging with USB cable)
Disconnect the mains charger (
15
) and store it in the accessories compartment.
How to switch off the
PipeCheck
plus
• Press and hold the power switch (
2
) on
the device’s front side for approx. 3 sec-
onds.
The
PipeCheck
plus
device is now switched
off, the screen will go off.
2
