Page 19
Read stored data
he measured values and fault locations stored on the SD card can be shown on
the display.
Pressing the „
“ soft key in the single measuring mode or during the
fault location mode (for NiCr measurements only) takes you to the “Read stored
data” mode.
The desired measurement file can be
selected by pressing the „
“ soft key.
Press the “OK” soft keys to select the mea-
surement method underlaid with the dark
background that is marked with a „
“.
The values stored in the measurement file
are displayed.
Press the „
“ soft key to scroll down-
wards through the value list line by line.
Once the bottom line is reached, the arrow
changes appearance „
“ and renewed
pressing of the soft key takes the display
back to the top of the list.
Press the „
“ soft key to display the next stored measurement point. Once
the last stored measurement point has been reached, press the soft key again
to take the display back to the first stored measurement point.
Pressing the „
“ soft key takes you back to the “Read stored data” menu.
Pressing the „
“ soft key leads to the device settings menu.
