Lancia Ypsilon, Руководство пользователя

Страница: 157 / 222

156
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
fig. 36 L0C0165m
BOOT LIGHT fig. 36
To change the bulb, proceed as fol-
lows:
❒
open the tailgate;
❒
remove the light unit A levering in
the point shown by the arrow.
❒
open the protective cover B and re-
place the snap-fitted bulb;
❒
reclose the protective cover B on
the lens;
❒
refit the light unit A inserting it in
its correct position firstly on one
end and then on the other until it
clicks into place.
IF A FUSE BLOWS
GENERAL fig. 37
The fuse is a protective device for the
electric system: it comes into action
(i.e. it cuts off) mainly due to a fault
or improper action on the system.
When a device does not work, check
the efficiency of its fuse. The conduc-
tor element A must be intact. If not,
replace the fuse with one of the same
amp rating (same colour).
B undamaged fuse
C fuse with damaged filament.
To facilitate fuse replacement, use the
pliers D hooked to the fusebox on the
instrument panel.
fig. 37 L0C0122m
Never replace a fuse with
metal wires or anything
else.
Never replace a fuse with
metal wires or anything
else. Never replace a fuse with an-
other with a higher amp rating,
DANGER OF FIRE.
WARNING
If a general fuse (MEGA-
FUSE, MIDI-FUSE, MAXI-
FUSE) cuts in, do not attempt any
repair and contact a Lancia Dealer-
ship.
WARNING
If fuse blows again, con-
tact a Lancia Dealership.
WARNING
Before replacing a fuse,
make sure the ignition key
has been removed and that all the
other services are switched off
and/or disengaged.
WARNING
135-164 Ypsilon GB 13-10-2008 11:42 Pagina 156