Lancia Ypsilon, Руководство пользователя

Страница: 116 / 222

115
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
To release the handbrake:
❒
Slightly lift the handbrake and press
release button A ;
❒
Keep button A pressed in and lower
the lever. Warning light
x
will go
out.
Press the brake pedal when carrying out
this operation to prevent the car from
moving accidentally.
USING THE
GEARBOX
To engage the gears, press the clutch
pedal fully and shift the gear lever
into one of the required positions (the
diagram is shown on the knob).
IMPORTANT The car can only be
put into reverse gear when it has
stopped moving completely. With the
engine running, before engaging the
reverse, wait at least 2 seconds with
the clutch pedal fully down to prevent
damage and grating of the gears.
HANDBRAKE fig. 1
The handbrake lever is located be-
tween the two front seats.
Pull the handbrake lever upwards un-
til the car cannot be moved.
Four or five clicks are generally
enough when the car is on level
ground while nine or ten may be re-
quired if the car is on a steep slope or
laden.
IMPORTANT If this is not the case,
contact Lancia Dealership to have the
handbrake adjusted.
When the handbrake lever is pulled
up and the ignition key is at MAR the
instrument panel warning light x
will come on with fixed light.
fig. 1 L0C0088m
111-124 Ypsilon GB 10-10-2008 10:26 Pagina 115