Lancia THESIS CONNECT, Руководство пользователя

Страница: 63 / 386

62
Control C (fig. 40)
5 - Lumbar support increase
6 - Lumbar support decrease
Control C (fig. 44)
9 - Lumbar support increase
10 - Lumbar support decrease
11 - Vertical support increase
12 - Vertical support decrease.
HEATING (fig. 45)
To switch seat heating on, rotate
control E to one of positions “ 1 ”,
“ 2 ” or “ 3 ” corresponding to the dif-
ferent heating intensity levels. To
switch seat heating off, rotate con-
trol
E to position “ 0 ”.
fig. 45
L0A0175b
STORING THE DRIVER’S SEAT
POSITIONS (fig. 46)
The system allows to store and
recall three different driver’s seat
positions and external rear view mir-
ror positions.
Seat position memorization also
includes the head restraint adjust-
ment in height, the position of the
external rear view mirrors and of the
steering wheel (only versions with
electric adjustment).
The seat, external rear view mirror
and steering wheel positions can
only be stored when the ignition key
is at
MAR .
Adjust the position of the seat,
head restraint, external rear view
mirrors and steering wheel by means
of the relevant controls, then press
for about 3 seconds any of buttons
“
1 ”, “ 2 ” or “ 3 ” each corresponding
to one stored position, until a confir-
mation beep is heard.
When memorising the seat posi-
tions, also the head restraint, electric
rear view mirror and steering wheel
positions are memorised.
The previously stored position will
automatically be deleted when a new
position is stored under the same
button.
IMPORTANT Seat position mem-
orization does not include lumbar
adjustment and heating actuation.
Recalling stored positions
With the key in position MAR , any
stored position can be recalled by
briefly pressing the respective but-
ton “
1 ”, “ 2 ” or “ 3 ”. The seat will
move automatically and stop in the
stored position.
fig. 46
L0A0152b