Lancia THESIS CONNECT, Руководство пользователя

Страница: 335 / 386

334
SPRAY NOZZLES (fig. 21)
If there is no jet of liquid, first
make sure that there is liquid in the
reservoir. Then make sure that the
holes in the nozzles are not clogged
up. Use a pin for this if necessary.
The windscreen washer jets can be
directed through screw A . Direct the
spray so that it reaches the highest
point reached by the blades.
fig. 21
L0A0163b
The blades must also be perfectly
clean before starting the check. If
required, clean the corners with
warm water and soap.
1 ) Check the blades carefully. They
should not be broken or damaged in
any part. Replace both the blades if
they are broken or damaged.
2 ) If the blades are intact, continue
by checking the operation. Operate
the windscreen washer and the
wiper. If the blades clean the wind-
screen perfectly they can be kept. If
not, replace them both.
Replacing the blades
(fig. 20)
To replace the windscreen wiper
blades:
1 ) Lift the windscreen wiper arm.
2 ) Press the lock spring tab and
remove the blade A from arm B .
3 ) Insert the new blade in the
windscreen wiper arm until the lock
spring clicks.
IMPORTANT After replacing,
make sure that the blades are cor-
rectly fastened to the windscreen
wiper arm.
fig. 20
L0A0162b