66
SAFETY
ST
AR
TING
AND DRIVING
W
A
RNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICA-
TIONS
INDEX
DASHBOARD
AND
CONTROLS
❒
in synchronous mode (at half the
frequency of the windscreen
wiper) when the windscreen wiper
is running.
The rear window wiper will run in
continuous mode when the wind-
screen wiper is running and reverse
gear is engaged.
Pull the stalk towards the dashboard
(unstable position) to operate the rear
window washer.
Hold the stalk pushed for longer than
half a second to operate the rear win-
dow wiper as well.
Smart wash function is activated as
for the windscreen wiper when the
stalk is released.
The wiper will flick once to indicate
that the sensor has been reactivated.
The rain sensor is able to recognize
and automatically adjust itself in the
presence of the following particular
conditions:
❒
dirt on the controlled surface (salt,
dirt, etc.);
❒
difference between day and night.
Deactivation
Move the lever from position
B
or turn
the ignition key to
STOP
.
At the next start-up (key at
MAR
),
the sensor will not be reactivated even
if the stalk is at
B
. To activate the sen-
sor, move the stalk to position
A
or
C
and then to position
B
or turn the sen-
sitivity adjustment knurled ring.
fig. 71
L0C0073m
Streaks of water may
cause undesired blade
moving.
WARNING
REAR WINDOW WIPER/
WASHER fig. 72
The device can only work when the
ignition key is at
MAR
.
Turn ring
A
from position
å
to posi-
tion
'
to open the rear window wiper
as follows:
❒
in flick mode when the windscreen
wiper is not running
fig. 72
L0D0075m
