176
W
A
RNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICA-
TIONS
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
ST
AR
TING
AND DRIVING
IN
EMERGENZA
MAINTENANCE
AND CARE
BRAKE FLUID fig. 14
Release cap: check that the liquid
contained in the tank is at the maxi-
mum level.
Fluid level in the reservoir must not
exceed the
MAX
mark.
Use the brake fluid shown in the
“Fluids and lubricants” table (see
“Technical Specifications”).
NOTE Carefully clean the cap of
reservoir A and the surrounding sur-
face.
When opening the cap, make sure
that no dirt gets into the reservoir.
For topping up always use a funnel
with built-in filter (mesh smaller than
or equal to 0.12 mm).
IMPORTANT Brake fluid is hygro-
scopic (i.e. it absorbs moisture). For
this reason, if the car is mainly used
in areas with a high degree of atmos-
pheric humidity, the fluid should be
replaced at more frequent intervals
than specified in the “Service sched-
ule”.
fig. 14
L0D0213m
Do not travel with the
windscreen washing reser-
voir empty: the action of the wind-
screen washer is essential for im-
proving visibility.
WARNING
Some commercial addi-
tives for windscreen wash-
ing are flammable. The engine
compartment contains hot parts
which could start a fire if they
come into contact.
WARNING
WINDSCREEN/REAR WINDOW
WASHER FLUID fig. 13
To add fluid, lift the cap
A
and pour
in a mixture of water and
TUTELA
PROFESSIONAL SC 35
fluid in the
following proportions:
❒
30% of
TUTELA PROFES-
SIONAL SC 35
and 70% water in
summer.
❒
50% of
TUTELA PROFES-
SIONAL SC 35
and 50% water in
summer.
Use
TUTELA PROFESSIONAL
SC 35
neat at temperatures lower
than 20°C.
Check level through the reservoir.
fig. 13
L0D0212m
