156
W
A
RNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICA-
TIONS
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
ST
AR
TING
AND DRIVING
IN AN
EMERGENCY
BOOT LIGHT fig. 34
To change the bulb, proceed as fol-
lows:
❒
open the tailgate;
❒
remove the light
A
levering in the
point shown by the arrow.
❒
open the protection
B
and replace
the snap-fitted bulb;
❒
re-close the protective cover
B
on
the lens;
❒
refit the light
A
inserting it in its
correct position firstly on one end
and then on the other until it
clicks into place.
fig. 34
L0D0197m
REPLACING FUSES
INTRODUCTION fig. 35
The fuse is a protective device for the
electric system: it comes into action
(i.e. it cuts off) mainly due to a fault
or improper action on the system.
Check the efficiency of the corre-
sponding fuse when a device does not
work: the conducting element
A
must
not be interrupted. If it is, replace the
blown fuse with another with the
same amperage (same colour).
B
: intact fuse
C
: fuse with damaged filament.
Use the tongs
D
in the fusebox on the
dashboard to change a fuse.
fig. 35
L0D0198m
If a fuse blows again, con-
tact a Lancia Dealership.
WARNING
Never replace a fuse with
another of higher amper-
age: FIRE RISK.
If a general protection fuse
(MEGA-FUSE, MIDI-
FUSE, MAXI-FUSE) blows, con-
tact your Lancia Dealership
WARNING
Remove the key from the
ignition switch and switch
off all loads before replacing a
fuse.
WARNING