22
P.N. 28-0558/04
Valves can be adjusted by scrolling through the menus (see figure above) using the UP and
DOWN arrows. By pressing the ENTER button, a submenu is revealed. In the submenu, the
individual valves can be adjusted to the desired configuration.
B. MENUS AND SUBMENUS
1.
Bonus Flavors
a.
Decide if the bonus flavors will be set to add an injected flavor to the brands or dispense
carbonated water/plain water.
b.
Choose the
V
alve number (1-4) by scrolling
UP
and
DOWN
arrows.
c.
Use the
LEFT
and
RIGHT
arrows to shift to the
T
op,
M
iddle, or
B
ottom "bonus" flavors
categories.
d.
Press the
UP
and
DOWN
arrows under
T
op,
M
iddle, or
B
ottom to select it as an
injected flavor, carbonated
S
oda water, or plain
W
ater. (
NOTE:
Water is
NOT
an option
for Valves 1 and 4.)
e.
Press
ENTER
to finalize settings. Panel lights should confirm finalized configurations.
2.
Brands
a.
Decide how the brands will be setup.
b.
Choose the
V
alve number (1-4) by scrolling
UP
and
DOWN
arrows.
c.
Use the
LEFT
and
RIGHT
arrows to shift to the
L
eft or
R
ight categories.
The Left or
Right categories are set with the assumption that you are looking at them from
the front.
d.
Press
UP
and
DOWN
arrows under
L
eft (1-2) or
R
ight (1-2) to select the brand per side
as a single or double. For example, for bezel PN
V:1 L:1 R:2
3.
Soda/Water
a.
Decide which switch locations will be carbonated and/or non-carbonated drinks.
(
NOTE:
Only adjustable on Valves 2 and 3.)
b.
Choose the
V
alve number (2-3) by scrolling the
UP
and
DOWN
arrows.
c.
Use the
LEFT
and
RIGHT
arrows to shift to the number categories (
1-4
).
The number
categories correspond to the brand location (per valve) that is being configured.
d.
Press the
UP
and
DOWN
arrows under the number to select if that brand will be
carbonated
S
oda or non-carbonated plain
W
ater. If a single brand per side, only
number
1
and/or
3
need to be set.
4.
Automatic Agitation
a.
Each Series 14800 ice beverage dispenser is equipped with automatic agitation for the
ice bin. The unit is shipped with timing set at two seconds (2000 milliseconds) ON every
60 minutes for cubed ice. The unit is shipped with timing set at four seconds (4000
milliseconds) ON every 150 minutes for pellet ice.
Содержание Flavor Select 30
Страница 11: ...11 P N 28 0558 04 1 4 INSTALLATION OVERVIEW 1...
Страница 12: ...12 P N 28 0558 04 1 5 INSTALLATION OVERVIEW 2...
Страница 25: ...25 P N 28 0558 04 NOTES...
Страница 39: ...39 P N 28 0558 04 NOTES...
