Lance Truck Camper, Руководство пользователя

Страница: 78 / 112

78
If the slide-out room will not move when using the
remote, check the following:
The battery is connected and fully charged.
The power fuse located on the electric jack
control unit in the cabover step is not blown.
There are no other obstructions in the room’s
path.
The camper is level and not in a rack or
twisted position.
In the event that the slide-out room fails to operate
after review of the troubleshooting steps mentioned
above, proceed with the following:
1. Locate the control board.
2. Un-plug both motors connectors at control
board.
3. The slide-out room may now be pushed in
or out as desired. Larger slide-out room(s)
may need several individuals to push. When
pushing the slide-out room, push both sides
equally to ensure the slide-out room remains
even. Once slide-out room is fully retracted
or in, plug both motors connectors back in at
the control board, this applies a brake to the
motor and keeps the slide-out room locked in
position.
CAUTION
DO NOT MOVE THE CAMPER UNLESS
THE MOTORS ARE PLUGGED IN AT THE
CONTROL BOARD.
ELECTRICAL SYSTEM MAINTENANCE
Disconnect all power sources before performing any
service work on the system. This includes the 120-
volt AC power to the converter, the battery and the
connection between the camper and the truck.
The slide-out room system requires a minimum
battery voltage of 12-volts. Be sure the battery is fully
charged for best performance.
Maintain the battery as outlined in the Battery Sec-
tion under Electrical Systems. Check the terminals
and other connections at the battery, fuse panel and
the control board. Be sure the connections are tight,
clean, undamaged and corrosion-free.
MECHANICAL MAINTENANCE
The slide-out room mechanism is designed to be
virtually maintenance free. During long-term storage,
apply a seal dressing such as 303© Protectant to the
slide-out room seals. 303© Protectant is available
at most RV or auto parts supply stores. This dress-
ing will also lubricate the seals and make it easier to
extend and retract the slide room.
SYSTEM TROUBLESHOOTING
The camper body, the slide-out room and the slide-
out room mechanism make up a slide-out room sys-
tem. Each needs to function properly with the others.
Every unit has its own characteristics. Symptoms of
malfunction may appear to be the same, but trouble-
shooting and fixing a problem must include a thor-
ough check of all the interrelated components. When
something restricts room travel, the drive mechanism
is designed to stop. If the room is restricted, the
system may put undue pressure on the camper body,
slide-out room or mechanism. The room may not seal
properly and the obstruction may cause fatigue and
premature system failure.
Before troubleshooting the system or contacting an
authorized Lance Service Center, make sure the bat-
tery is fully charged and there are no obstructions to
room movement.
ELECTRICAL TROUBLESHOOTING
There are no field serviceable parts in the motor or
control system, therefore electrical troubleshoot-
ing and service by the owner is limited to thorough
checking of wiring and connections, checking the
fuse at the fuse box and proper battery maintenance.
Contact your Lance Dealer for any other service
requirements.