Lance Truck Camper, Руководство пользователя

Страница: 77 / 112

77
SLIDE-OUT ROOM SYSTEM
(Schwintek In-Wall)
The slide-out room uses an in-wall mechanism to
move the room. The mechanism is driven by two (2)
12-volt DC motors by the camper battery(s). The
electric jack controller operates the slide-out room.
SYSTEM OPERATION
During extension or retraction of the slide-out you
may hear some noises that are associated with the
electrical motor, mechanical system or the room slid-
ing by the seals. These sounds are normal. Some of
the slide-out components need a “break-in” period
so they can seat properly. After a dozen or so room
cycles, these break-in noises should decrease.
Please note that some noises associated with the
electrical and mechanical systems will always be no-
ticeable during slide-out operation. If very loud noises
occur, contact your Lance Dealer. When the slide-out
room is extended outside of the camper, elements
such as rain, snow, dirt or other debris may cling to
the outside surfaces of the room and could affect the
function of the slide-out room.
When the room is retracted, material clinging to the
exterior surfaces may be brought into the camper.
Always check the exterior surfaces of the slide-out
room before retracting it. Remove excess water,
snow, dirt, or other debris. Ensure that the outside
surfaces are as clean and dry as possible.
The seals around the outside of the slide-out are not
designed to act as a squeegee. Do not depend on
them to remove water.
NORMAL OPERATION
Read and understand this section of the Owner’s
Manual to avoid injury and/or property damage. Keep
people and objects clear of the slide-out room during
operation.
The camper must be level before operating the slide-
out room.
Remove any obstructions that may restrict the slide-
out room movement.
Before extending or retracting the slideout room,
open a vent, window or door. The operation of the
slide-out room can create enough vacuum or pres-
sure to damage windows or doors.
CAUTION
DO NOT MOVE THE CAMPER WITH THE
ROOM EXTENDED.
Operation of the slide room is by the electric jack
remote. Activate the control system by pressing the
WAKE button on the activation switch near the entry.
Activate the remote by pressing the POWER+SELECT
button. Press the SELECT button a second time to
activate the accessory circuit. The yellow LED should
now be illuminated. The slideout(s) is controlled by
the upper set of buttons on the remote denoted as
ACC. 1 and ACC. 2. Depressing the EXTEND or
RETRACT buttons will move the slide room. Only one
slideout can be powered at a time.
MANUAL OVERRIDE OPERATION
The slide-out room system can be overridden to
extend or retract the room in case there is an elec-
trical power interruption or failure, or other system
malfunction. During manual operation of the slideout,
the confined working quarters can cause pinch and
crush hazards. Ensure that the slide out path is clear
of obstructions in the interior of the camper.