19
ELECTRICAL CONNECTION TO TRUCK
Your Lance Camper comes equipped with a 12-volt
electrical cord with a molded camper connector. The
truck electrical connector will be installed by your
Lance Dealer to your truck wiring system. With the
wiring and connectors hooked-up, your truck will
supply 12-volt DC power to charge your camper
battery and provide power for the 12-volt power needs
while the truck is operating.
Lance Camper uses a proprietary connection plug that
has been designed specifically to handle the
amperage requirements of the 12v circuit on the 3-way
refrigerator.
Under no circumstances should the plug be altered or
changed to another type. Common style plugs are not
designed to accommodate the 8 gauge wire or
amperage demands required for the refrigerator.
COLOR GAUGE
FUNCTION
Black
8
12-volt power
White
8
Ground (-)
Green 14
Running Lights
Red
16
Left Turn Signal
Brown 16
Right Turn Signal
Yellow 16
Back-up Lights
NOTE:
Do not use less than 8 gauge wire size for
charge lines. Also, do not attach them to smaller
gauge wires. Your camper maybe equipped with a 3-
way refrigerator which uses 120v, 12v or LP gas to
operate. Selecting the 12v operation requires a large
amount of amperage. This selection should only be
used while traveling when your truck alternator can
produce this amount of amperage. Using an 8 gauge
wire from your truck battery to the camper will ensure
that adequate amperage will be supplied to the
refrigerator.
To protect your truck’s 12-volt system from overload, a
40-amp circuit breaker should be installed at the power
source under the hood. A Battery Separator may be
installed on your Lance camper. Its purpose is to
protect your truck’s starting battery from discharge. To
handle the camper’s electrical requirements and to
charge the camper battery, 8 gauge hot and ground
wires must be run from the power source under the
truck hood to the 12-volt camper electrical connector
location in the truck bed.
17
Lance Camper uses a proprietary connection plug that
has been designed specifically to handle the
amperage requirements of the 12-volt circuit on the
3-way refrigerator.
NOTE: Do not use less than 8 gauge wire size for
charge lines. Also, do not attach them to smaller gauge
wires. Your camper maybe equipped with a 3-way
refrigerator which uses 120-volt, 12-volt or LP gas to
operate. Selecting the 12-volt operation requires a large
Содержание Truck Camper
