_____7. Inspect hydraulic brake lines and hydraulic cylinders.
_____8. Check oleo strut for correct inflation and height,
approximately 1.5 inches compression, which will leave about
3 inches of shaft showing.
_____9. Check nose gear for alignment.
_____10.
Inspect main gear sockets and fasteners.
_____11.
Check shimmy damper on nose wheel.
_____12.
Inflate all tires to proper pressure and inspect safety
of axle nuts.
_____13.
Clean off landing gear.
FUEL SYSTEM
_____1. Check both tanks and filler caps.
_____2. Drain sumps.
_____3. Check all fuel lines for leaks at connections and security
of mounting.
_____4. Check fuel tank vents.
_____5. Check condition and operation of fuel tank selector valve.
_____6. Check placard at fuel tank filler caps.
FUSELAGE AND HULL GROUP
_____1. Check surface condition of skin for general condition,
deterioration, distortion, cracks, and other evidence of failure
and security of attachment.
_____2. Inspect fuselage primary structure for damage.
_____3. Inspect internal condition of fuselage.
_____4. Inspect for defects, security and safety of all attachment
fittings of various systems attached to the fuselage.
Содержание ES-P
