8
· E
N
G
LI
SH
EN
mode chosen, the music and light settings
symbols for alarm mode will flash. The sound
mode display starts flashing.
Note
The sunrise simulation will activate 30 minutes
before wake-up time. The LED gradually be-
comes brighter until the wake-up time.
Alarm sound setting
You can choose between 5 sounds (4 na-
ture 1 beep) or FM radio.
01
Press the "+" and "-" buttons to select
the desired nature sound (S-1 to S-5)
or the radio (S6). Then press the alarm
1 or 2 buttons to confirm your choice.
02
The sound volume display
now starts flashing.
03
To adjust the alarm sound volume,
press the "+" and "-" buttons
successively to the desired level (V01
to V15). Then press the alarm 1 or 2
buttons to confirm your choice. The
light intensity display flashes.
Note
If the FM radio is on at the time of the wake-
up alarm, the radio will stop with the wake-up
alarm, and the nature sound will sound for 2
minutes before the radio automatically restarts.
End light intensity adjustment
It is possible to adjust the end light intensity of
the sunrise simulator to a level of your choice
from 30 intensities offered. To do this, select the
desired intensity using the "+" and "-" buttons.
Snooze function
When a tone sounds, you can stop it temporar-
ily by pressing the snooze button. The alarm
will then sound again after 5 minutes, each
time the snooze button is pressed.
Disable the alarm
When the alarm sounds, press any button to
turn it off except the snooze button. Without
any intervention on your part, the alarm will stop
automatically after 5 minutes. In the app, you
can select the duration from 1 to 15 minutes.
During the sunrise simulation process, you
can also turn off the light by holding down the
"light" button for a few seconds. If your wake-
up mode includes sound, it will sound at the
time of the programmed wake-up.
Note
The above operations do not deactivate the
alarm. This will sound again the next day at the
set time. If you want to permanently deacti-
vate alarm 1 or 2, press the alarm 1 or 2 button
again. The corresponding symbol disappears.
Snooze Function –
Setting the Alarm
With the WL-100C, you can also use a sunset
simulation to fall asleep peacefully. Once this
function is activated, the light will start at the
selected intensity and will gradually reduce
until it turns off.
You can combine this function with one of the
6 sounds specially developed to help you fall
E-IM-WL100C-Lot001-1.1.indd 8
E-IM-WL100C-Lot001-1.1.indd 8
18/10/2022 14:30:20
18/10/2022 14:30:20
