9
· E
N
G
LI
SH
EN
asleep. These continuous neutral sounds, us-
ing specific frequencies, are used to cover
ambient noise. The diffusion of these sounds
promotes a relaxing effect in the user: by fo-
cusing on an undifferentiated sound, the us-
er’s brain activity decreases and the worries
that would prevent them from falling asleep
take a back seat.
You can also choose only one of these 6 sounds
(S1-S6) to fall asleep to or your favourite radio
station (S7). The sound will gradually decrease
until it turns off after the chosen duration.
To adjust the sleep function, press the "sleep
function" button. The symbol flashes on the
display screen.
Note
The sleep function starts when it is ac-
tivated, regardless of the time.
Setting the mode (sound+light (F1)), light (F2),
sound (F3), sounds (S1-S7), sound volume
(U01-U15) and the start light intensity (L01-L30)
is similar to the settings for the “Sunrise” func-
tion. To confirm your choices, press the "sleep
function" button.
You can choose from 3 durations (15/30/60
minutes). To select one of them, press the "+"
and "-" buttons. To confirm your choice, press
the "sleep function" button.
When the sleep function is activated, you can
adjust the intensity of the light, the sound vol-
ume or even change the radio station:
01
Press and hold the "+" and "-" but-
tons to change the radio station.
02
Press the volume up and down
buttons to adjust the sound volume.
03
Press the buttons to adjust
the intensity of the light.
To disable sleep mode, press and hold the
"snooze function" button for several seconds.
Lamp/ambient light function
with colour change
You can also use the wake-up light as a normal
lamp or as a colour changing ambient light.
• To activate the normal lamp, press the
“light” button once. You can then ad-
just the light intensity (L1 to L30) by
pressing the "+" and "-" buttons.
• To activate the ambient light, press the
"coloured light" button. The LEDs then
change colour automatically. You can
also select one of the 6 specific col-
ours by pressing the "+" and "-" but-
tons. You can then adjust the light inten-
sity by holding the "+" and "-" buttons.
Listen to the radio
The light alarm clock has a flexible aerial on
the back of the device. Unwind the wire and
place it in the most extended position to en-
sure the best reception.
• Press the FM radio button to activate
it. The icon flashes on the display.
• To start the automatic station search,
press and hold down the “radio
E-IM-WL100C-Lot001-1.1.indd 9
E-IM-WL100C-Lot001-1.1.indd 9
18/10/2022 14:30:20
18/10/2022 14:30:20
